CHT-Series (Hydrotreating Catalysts)
Removal of sulfur, nitrogen, and metals from petroleum fractions
Applications
- Used in hydrotreating processes for various petroleum fractions such as naphtha, kerosene, and diesel.
- Removal of sulfur, nitrogen, and heavy metals to produce clean and sustainable fuels.
- Improving cetane number and enhancing properties of middle distillate products.
- Suitable for producing ultra-low sulfur diesel (ULSD) and high-quality gasoline compliant with Euro-4 and Euro-5 environmental standards.
- Applicable in both primary and final hydrotreating units in refineries.
Features
- Oxide-based support with Co-Mo / Ni-Mo metals
- High resistance to spalling and coke formation
- Suitable for HDS, HDN, and HDM processes
- Usable in both new and revamped units
Advantages
- Reduction of sulfur content to below 10 ppm
- Higher efficiency in long operating cycles
- Maintains activity under thermal shocks and feed contaminants
- Suitable for industrial and semi-industrial units
Physical & Chemical Properties
| Parameter | Value (Co-Mo) |
|---|---|
| Active component | Co-Mo |
| Bulk density, g/cm³ | 0.70 – 0.80 |
| Diameter, mm | 1.5–2.5 |
| Average crush strength, kg/mm | > 2.1 |
| Parameter | Value (Co-Mo / Ni-Mo) |
|---|---|
| Active component | Co-Mo / Ni-Mo |
| Bulk density, g/cm³ | 0.91–1.10 |
| Diameter, mm | 1.2–1.4 |
| Average crush strength, kg/mm | > 2.0 |
| Specific surface area, m²/g | ≥ 235 |
