CCR-56 (Continuous Catalyst Regeneration)

Continuous regeneration catalyst for CCR units

Applications

  • Used in Continuous Catalytic Reforming (CCR) processes with moving-bed units.
  • Increasing octane number (RON) and producing aromatics with maximum yield.
  • Suitable for high-capacity refinery units with continuous catalyst regeneration.
  • Optimized for producing aromatics feedstock and high-quality gasoline.

Features

  • Stable alumina-chloride support with precious metals.
  • Engineered for high stability under low-moisture operating conditions.
  • Enhances unit efficiency up to 10% depending on catalyst grade.

Advantages

  • Consistent and efficient performance in long-term operating cycles.
  • High aromatic selectivity and elevated RON.
  • Reduced pressure drop across the catalyst bed (ΔP).
  • Compatible with UOP Platforming, Axens Octanizing, and similar technologies.

Physical & Chemical Properties

Parameter CCR-56 A CCR-56 B
Platinum content wt.% 0.27 – 0.30 0.25 – 0.30
Bulk density, g/cm³ 0.63 – 0.70 0.58 – 0.65
Average diameter, mm 1.6 1.6 – 1.8
Average crush strength, N/sphere > 32 > 32