CCR-56 (Continuous Catalyst Regeneration)
Continuous regeneration catalyst for CCR units
Applications
- Used in Continuous Catalytic Reforming (CCR) processes with moving-bed units.
- Increasing octane number (RON) and producing aromatics with maximum yield.
- Suitable for high-capacity refinery units with continuous catalyst regeneration.
- Optimized for producing aromatics feedstock and high-quality gasoline.
Features
- Stable alumina-chloride support with precious metals.
- Engineered for high stability under low-moisture operating conditions.
- Enhances unit efficiency up to 10% depending on catalyst grade.
Advantages
- Consistent and efficient performance in long-term operating cycles.
- High aromatic selectivity and elevated RON.
- Reduced pressure drop across the catalyst bed (ΔP).
- Compatible with UOP Platforming, Axens Octanizing, and similar technologies.
Physical & Chemical Properties
| Parameter | CCR-56 A | CCR-56 B |
|---|---|---|
| Platinum content wt.% | 0.27 – 0.30 | 0.25 – 0.30 |
| Bulk density, g/cm³ | 0.63 – 0.70 | 0.58 – 0.65 |
| Average diameter, mm | 1.6 | 1.6 – 1.8 |
| Average crush strength, N/sphere | > 32 | > 32 |
